optical microscopy

The compatibilization of CPE for PVC with linear SBS and star SBS have been investigated. The properties and morphology of PVC/ CPE-SBS blend were studied by impact testing, stress-strain behaviour, dynamic mechanical analysis ( DMA), scanning electron microscopy ( SEM) and optical microscopy.

通过冲击试验、应力－应变试验、动态力学分析（DMA）、扫描电镜（SEM）及光学显微镜观察，研究了CPE增容的PVC／CPE－SBS共混物的性能与形态结构之间的关系。

The C60/ C70, sample was prepared by carbon electric arc method, and its crystal morphology was studied by optical microscopy, SEM and TEM.

采用电弧法制备了C（60）/C（70），并用光学显微镜、扫描电子显微镜和透射电子显微镜对其结晶形貌进行了研究。

Thermal fatigue test of two kinds of WC steel bonded carbides with different WC contents was examined on self-strained thermal fatigue testing machines, and thermal fatigue crack propagation process was investigated by optical microscopy and SEM.

在自约束型热疲劳试验机上对碳化钨含量不同的钢结硬质合金进行了热疲劳试验，用金相显微镜和扫描电镜对热疲劳裂纹扩展行为进行了研究。

The effects of minerals ( oxides) on coke microstructure are studied by adding 13 types of different oxides into coal to carbonize using optical microscopy and X-ray powder diffraction.

将十三种矿物质（氧化物）添加到煤中炭化，用光学显微镜和X射线衍射方法研究矿物质的存在对所得焦炭显微结构的影响。

The microstructural evolution of the alloy was investigated by optical microscopy and scanning electron microscopy.

利用光学显微镜和扫描电子显微镜分析合金在不同变形条件下的组织演化规律.

Near-field Optical Microscopy Using High Q Factor Tuning Fork as Force Sensor

高Q值音叉调制近场光学扫描显微镜研究

In order to inquire into the worn mechanisms, the morphology and structure of worn surfaces and wear debris were examined through using optical microscopy, scanning electron microscopy, X-ray diffraction, laser Raman micro-spectroscopy.

采用金相、扫描电镜、X射线衍射、拉曼光谱等手段对不同试验条件下的摩擦表面、磨屑的形貌与结构进行了检测，探讨了C／C复合材料的磨损机理。

Compared before and after stretch spinal nerve roots HE stained and observed by optical microscopy, there were no injury performances, the structures remain intact. 4.

牵拉前后脊神经根，经HE染色，光学显微镜下观察，均无损伤表现，仍保持完整结构。

The theory of Near Field Optical Microscopy ( NFOM) is reviewed. A real system is presented with which the fish scale sample is imaged and analyzed.

对NFOM的原理进行了论述，并在一个实验的NFOM系统上对鱼鳞片样品进行了成像和分析。

Optical microscopy, precise analytical balance, transmission electron microscopy, scanning electron microscopy and X-ray diffraction were used for investigation on composite microstructure and interface morphology.

利用光学显微镜、精密分析天平、透射电子显微镜、扫描电子显微镜和X射线衍射对复合材料的微观组织和界面形貌进行研究。

The hot brittleness mechanism and structure of surface oxide coating of low-alloy steels containing 0. 3%-0. 7% of copper have been investigated by means of hot/ cold bending tests, optical microscopy, SEM and EPMA.

用冷、热弯试验及光学显微镜、扫描电子显微镜和X射线微区分析仪分析研究了含0.3%～0.7%Cu的低合金钢表面氧化层结构及热脆机理。

These features are examined by optical microscopy, scanning electron microscopy, and transmission electron microscopy.

这些图形可以用光学显微镜, 扫描电子显微镜和透射电子显微镜来观察.

A structural study of cokes using optical microscopy and X-ray diffraction

用光学显微术和X-射线衍射法研究焦炭结构

Their thermotropic liquid crystal properties were studied with polarizing optical microscopy and differential scanning calorimetry.

通过偏光显微镜和差视扫描量热法对这些化合物的热致液晶性进行了研究。

By using Spark atomic emission spectrometer, Plasma spectroscopy, X-ray diffraction, Optical microscopy and SEM, the changes of composition and microstructure were measured. By using Tensile specimen machine and Vickers hardness tester, mechanical properties were measured.

用火花原子放射光谱仪、等离子体光谱仪、X-Ray衍射仪、金相显微镜、场发射扫描电镜等手段测定了试样成份、显微组织和结构，用拉伸试样机、维氏硬度计测定了试样的力学性能。